How to transfer your BlackBerry 7 data to a BlackBerry 10 device using BlackBerry Link

If you're upgrading from a BlackBerry 7 device to a new BlackBerry 10 device, there is a very easy way to transfer over all of your data including calendar, contacts and other various items so you don't have to do any of the hard work. Using BlackBerry Link, you can easily transfer over your old data to a new BlackBerry 10 device in a matter of minutes with a few easy steps. Keep reading to see how it's done.

How to transfer your BlackBerry 7 data to a BlackBerry 10 device

Method 1

First off you'll need to install the latest version of BlackBerry Link on your Windows PC or Mac. 

After it's installed, open BlackBerry Link and plug in your BlackBerry 7 device with a microUSB cable

BlackBerry Link will tell you that your device is not supported but that's ok. Click the Transfer Device Data button to continue.

You'll see a few notes on the next screen, so once your squared away there, click Next.

Your transfer will begin (it won't take long). When it's done you'll be asked to disconnect the current device and connect the new BlackBerry 10 device.

Disconnect your BlackBerry 7 device and then connect the BlackBerry 10 device using a microUSB cable.

Once the BlackBerry 10 device is recognized by BlackBerry Link, click on the device in the window and then click Next.

You'll see a quick message with some things to note. Once you're squared away, click Next. 

The transfer will begin and you data will be moved to the new BlackBerry 10 device. 

When complete, you'll see a confirmation screen as well as a list of any errors or data that may not have been transferred. Click Finish.

Method 2

The method 2 can be done by SD card. It also works optimally. Just follow these instructions via your old Blackberry. On your old BlackBerry Phone, please Tap Search > find for ‘Device Switch’, after that ‘Go to Set Up’ > Device Switch > Using Media Card > Save Data. After that you are allowed to uncheck or check your phonebook data. Remove the SD card and enter to the new BB phone.

From here your new BlackBerry 10 device is ready to go. You'll want to jump in and finish out the setup for any additional settings or accounts. Be sure to check out our BlackBerry 10 Help Series for everything you need to know or hit up the CrackBerry forums for more discussion.

Read more »

01. How to setup your BlackBerry Z10 for the first time

WHEN TURNING YOUR BLACKBERRY Z10 ON FOR THE FIRST TIME, YOU'LL BE GREETED BY THE FIRST TIME SETUP. LIKE MANY SMARTPHONES, THIS IS BOTH AN INTRODUCTION IN HOW TO NAVIGATE THE HANDSET AND ALSO A CHANCE TO SET UP BASICS LIKE INTERNET, WIFI AND YOUR BLACKBERRY ID.

To begin using your new BlackBerry Z10, Insert the SIM card, SD card and battery. Power up your handset and follow the step-by-step instructions below to navigate successfully through the First Time Setup procedure.

1. Decide whether to use a 3G connection on your smartphone.
2. If you are near a wireless network, you can connect to it on the Wi-Fi Setup page. Simply find the Wi-Fi network you wish to join and enter the password to access it.
   
   
   
   
   
   1. Read the License Agreement and accept if you agree to its terms.
   2. Choose which country your Z10 will be operating in. 

      AGENT TIP

      At any point, to move through a screen or skip a screen, you may need to swipe a finger from right to left across the display.
   3. Set up a new BlackBerry ID, or sign in with an existing one if you are already a BlackBerry user. If you encounter any difficulties with the sign-in process, you can troubleshoot the problem here or contact the Geek Squad on 0800 049 4335 for some one-on-one support.
   4. Decide whether to turn on the Diagnostics and Locations services by choosing either On or Off. Turning Diagnostics on can help improve the way the device works by sending information to BlackBerry about any problems you come across. Turning on Locations will tailor search results and other information to suit your current whereabouts.
   5.  Check for updates to make sure your Z10 is running at its best. Your smartphone needs at least 20% battery to install any updates!
   6. Complete the Gestures tutorial to learn the best way to navigate your new handset. You must complete the tutorial to finish the setup wizard.
   
   
   

Read more »

How to reload the BlackBerry Z10 or Q10 operating system

Have you ever been in the position where your BlackBerry Z10 or BlackBerry Q10 simply won’t start up? Are you getting just a red flashing light but nothing else, no matter how many times you remove and reinsert the battery? Have no fear: just follow our handy guide below and you will see how you can reload your BlackBerry using BlackBerry Link, a USB cable and a little time!

When a BlackBerry 10 device is only flashing the red light and refusing to boot up, this indicates that the device’s operating system has become corrupted. The flashing light may follow the pattern of 1, 2 or 3 short blips, with a longer pause between the sets.

In order to fix this, you need to re-install the operating system on the device, which will then set the device back to its original factory state.

Please note: this process will completely wipe your device, so please make sure you have a backup of your personal information available to restore before going through this process. 

1. Download and install the latest version of BlackBerry Link for your computer.
2. Open BlackBerry Link software.
3. Plug in the BlackBerry device using your USB cable.
4. At the bottom left of the program, find the device you're having issues with and select it by clicking on it.

5.   The BlackBerry Link application will then ask to either reconnect or reload the device software. Choose Reload.

6.  Confirm the reload when prompted to do so, which will wipe clean any data previously on the handset.

7.  Allow the reload to complete, which can take some time. Whilst this is underway, the device will have a solid green light. This process of downloading and reinstalling the device can take an hour or more, depending on the speed of your internet connection, soplease don't disconnect the BlackBerry until the process has finished.

8.  Once the restore is complete, simply set up your device again, or restore it from a previous backup stored on your machine. However, if you want to restore a previous backup, remember to sign in to your BlackBerry ID on the device first! If you're not sure how to do this, we have a full guide available.

The good news is, this process is almost identical on both PC and Apple Mac. Simply follow the same process as above. Finally, if you have any questions, please don't hesitate to get in touch with us.

Read more »

How To Free Flash And Unlock BlackBerry

Flashing Unlocking Instructions Blackberry Indonesian for beginners

 to install and run software2 standard for Blackberry mobile phone repair needs.

The aims to be useful for the software still lay in recognizing proficiency level software for the Blackberry.Software2 required for Blackberry include:

1. Desktop Manager For Flashing / BB Update

2. MFI MultiLoader For Unlocking

3. Firmware2 requisite that must be installed and removed vendor.xml file its

4. JML Wipe Loader For BB & B Factory Setting

5. NET framework from Microsoft dotnetfx For Windows systems, so that they will be retrievable sw sw running smoothly.

6. Radio Lab Tool. For Cheque RF & Change IMEI / PIN BB

7. BB MCP (Master Control Program) to Application (*. COD) Bhs Indonesia BlackberryStep Installation Software Blackberry software are:

I. Install Desktop Manager

Program Install Desktop Manager and Media Manager, a Custom install. Do not automatic

“BlackBerry Automatic Update” Do not selected. And follow the instructions to complete.

Completed

II. Install Firmware mobile phones one by one according to type and version.

Firmware will be installed in C: \ Program Files \ Common Files \ Research In Motion \ Shared \ Loader Files

And the USB Driver BlackBerry stored in C: \ Program Files \ Common Files \ Research In Motion \ USB Drivers
When you have finished installing the firmware is needed, do not forget to delete the vendor.xml file located at C: \ Program Files \ Common Files \ Research In Motion \ AppLoader \ vendor.xml

III. Install MFI MultiLoader to Unlock Blackberry
Install the program MultiLoader MFI of 5.7 Mbyte file.
Copy Paste the available MML folder to C: \
MFI program can then be run from the Desktop. Do not plug the phone in the USB cable first.

Tick Tick Full Erase, and then plug the cable into the phone

So the process will run until Unlocking the HP screen will appear number 1.

that its mark has been successfully Unlock phone, and in a state of Cal Mode. next unplug, shut MFI. and the HP type START to exit the Cal Mode.

then mobile should be in flash with Desktop Manager to restore back the firmware that has been erased. Flashed with Desktop Manager or first way way way better. So the phone is back to normal and terunlock circumstances.

IV. Install JL_Cmder v1.9.1

Software to Erase Memory on a Blackberry Hang and can not enter into the menu. Method with type 4. Wipe

and to reset the factory settings type 5. Reset to Factory.

you must remember, the program is running Blackberry diconnect the cable without battery.

V. Radio Lab Tool to Convert Pin and IMEI

Radio Lab Tool Air Function to change the IMEI and PIN Blackberry already Blacklist / Suspend by Operator.

By way CAL Then click Connect à ID

IMEI and PIN can be Read, plainly fill IMEI and PIN and then click Write.
When finished later did flashing as usual.

VI. Software Software support

Install DotnetFX For all programs can run perfectly.
Install DotnetFX Among others, there are 3 versions were 2.0 3.0 and 3.5

Microsoft NET Framework is required by Windows to run the Blackberry software proficiency level.

Now we proceed with Flashing Blackberry using Desktop manager:

Step Flashing with Blackberry Desktop Manager Software

There are two ways to update the firmware with the Blackberry Desktop Manager Software (Flashing)

The first (default) By calling the Desktop Manager that is installed on the desktop.

The second (from DOS) By Calling Desktop Manager from DOS Mode.

Now let me first discuss the first.

Blackberry connect to your computer with a USB cable. New Hardware found when they appear. Find drivers in C: \ Program Files \ Common Files \ Research In Motion \ USB Drivers.

Then Run Desktop Manager from the Desktop on the computer

Click on Application Loader and it will appear like this

Select Update Software and then right click on Start, and will emerge from the Blackberry PIN USB already terconnect. Click OK.

Then the program would be to check the firmware stored in the hp, as well as firmware which is owned on a computer that stored in C: \ Program Files \ Common Files \ Research In Motion \ Shared \ Loader Files. REMEMBER Do not forget the previous delete vendor.xml file located at C: \ Program Files \ Common Files \ Research In Motion \ AppLoader.

after doing Checked, and when the phone’s firmware is already higher than a PC, it will appear as follows, so that the phone can not be updated, and if you like the flashing should be done two ways:

and an HP firmware versions, and the computer is a new version, it will appear as follows, click the Next button

then came the confirmation as shown below, click Finish, then CellPhone ready in flashing. At the start of the Erase, Flash and filling applications in need.

What if completed then be removed from the phone cord.

The second way, by default always appear No Software Update Required as follows, then the need flashing with the second from DOS Mode. Plug Usb Cable PC to phone without battery, causing the battery image omitted on the phone screen.

these are the steps:

Copy and Paste the following command:

CD \

CD PROGRA ~ 1

CD COMMON ~ 1

CD resear ~ 1

CD APPLOA ~ 1

LOADER / NOJVM

click Start à Run Type CMD à à à OK In the DOS window then right click and Paste then Enter

and automatically Application Loader Wizard will appear as follows,

Click Next, came the USB connection from the phone attached PIN

then display a list of applications that if we want to be added to the phone, then click Next.

press the Next button again, appears Updating Your Device

and when got: Wait for device initialization, plug the battery into the phone, the program will detect and initiate HP

then the process will run until completion, module essential modules will be uploaded. phone flashed over.

Thanks To Mr.

 Muhammad Wali Khan

Read more »